|
|
|
|
|
|
|
Valves
Easystow
Fender valves
are about as simple and
easy to use as you can get. The valves are simply open tubes, so there
are no threads to cross or o-rings to replace. To
seal, fold in half and insert
under the cover.
The
specialty tubing is
formulated for outdoor use
and constant compression and flexing. It's thick wall, when
creased, supports 30 psi before any leaking starts to occur. Prototypes
and samples have been exposed to repeated midwestern winters and
summers and still work great. As part of our fenders they're warranted
for as long as you own them.
Open
Closed
Valves are
located close to one end. Any pump with adaptors for
inflatable toys or boats will work. Tire type pumps will not. Care
should be used if inflating with a high pressure air compressor.
Once inflated, fold the tube in approximately half, remove the pump
nozzle
and work the tube under the cover. Only one crease is recommended.
To
avoid the
possibility
of getting water in the fender, do not submerse with open valves.
Fenders can be stored with the valves open or closed.
|